Burning the midnight oil

Lots to do and maybe not enough time to get it done so the late night sessions are going to have to happen.

Tonight I was able to get one of the interior panels we saved for last installed. we have been referring to it as the "swiss cheese" panel because it needed holes for 120 volt outlet, the TV antenna plate, the monitor system and the thermostat. I cut out all of those holes and have it installed. I was also able to finish the wiring to the entry door switches and add the telltales for the exterior lights. This way you know from inside if the light is on outside at a glance. One more small panel to install and the interior walls will be 100% again!

Rich was able to get the bath ABS primed and 2 coats of color on yesterday. I applied the final coat and they are now smooth and shiny. I was also able to get the final coats of paint on the AC inner cover and reinstall it. Tonight I am going to prime and paint the bathroom dome liner.

Rich installed the water tank, and I finished the wiring to the monitor panel, all that is left is installing the anchor blocks so it cannot move and the water tank is done.

Time to hit the shower and get some zzzz's